锅炉给水泵A大丰锅炉给水泵A锅炉给水泵启动与停车
该型泵适用于高压和X高压,习惯热冲击和机组负荷改变;泵芯为可抽式,易于检修和保护,在紧迫情况下可直接替换泵芯;一切部件高速动平衡后直接全体装置。当时上有两种结构形式的双壳体高能给水泵泵芯,一种是以FPD公司为代表的蜗壳轴向剖分中开式结构,另一种是以德国KSB公司为代表的泵芯径向剖分多X节段式结构。
GC型锅炉给X泵产品概述:GC型锅炉给X泵为单吸多X分段式离心泵,主要用于锅炉给水,所以又名锅炉给水泵。该系列多X泵适于输送温度低于110°C的清水或物理化学性质类似于水的无腐蚀性的其他,广泛用于工矿企事业单位的锅炉给水和城市生活供水。
GC型锅炉给X泵型号意义:
GC型锅炉给X泵产品特点:
1、水力模型X,效率高,性能范围广。
2、泵运行平稳,噪音低。\3、轴封采用软填料密封,可靠、结构简单,维修方便快捷。wjhuiquan7.18
GC型锅炉给X泵技术参数:
流量:5-55m3/h;
扬程:46-301m;
功率:3-75KW;
转速:2950r/min;
口径:φ40-φ100;
温度范围:≤80℃;
工作压力:≤2.7Mpa.
锅炉给水泵A大丰锅炉给水泵A锅炉给水泵启动与停车
锅炉给水泵A大丰锅炉给水泵A锅炉给水泵启动与停车
锅炉给水泵结构由动力端、液力端、传动部分和电机组成。锅炉给水泵泵体采用对称射界,双面都有进、出口设备,便于摆放装置。装有全启式溢流阀、进口装备低压蓄能器、出口装备球形或襄式缓冲器、整机装置在整体底座上便于用户搬家。具有结构紧凑、体积小、噪音低、轰动小、效率高、造型漂亮、操作维修便利等特色。
GC-type horizontal boiler water multi-stage pump structure description: GC-type boiler feed water pump for multi-stage, 11/2 GC-4GC four models of import and export in the incoming and out of the water section, are vertical upward, its head can be based on the need for use and increase or decrease the number of pump levels.Pump assembly is good or not, the performance has a great impact, especially the export of each impeller and the relative position of the guide wing import, each suction wheels spit outlet center must be aligned with the center of the guide wing, wherein a slight deviation will make the pump flow reduced, the head is reduced, the efficiency is poor, so after the overhaul assembly must pay attention, if there is a deviation must be adjusted.The main parts of the Gc-type multi-stage pump are the shaft, the bushing, the inlet section, the impeller, the guide wing, the sealing ring, the middle section, the water outlet segment, the balance ring, the balance plate, the tail cover.
The inlet section, the middle section, the water section and the tail cover are made of cast iron, forming the pump studio together.
The impeller is made of cast iron, with blades inside, liquid along the axial one-sided entry, due to the multi-stage pump impeller divssure varies, there must be axial force, this axial force by the balance plate to bear, impeller manufacturing by static balance test.
The shaft is made of high-quality carbon steel with a impeller in the middle and is secured to the shaft with keys, bushings and bushing nuts.One end of the shaft is mounted by the coupling component, which is directly connected to the motor.When viewed from the direction of rotation, the pump shaft rotates in the direction of the Sichuan page clock.
The sealing ring is made of cast iron, which divvents high-divssure water from leaking back into the water in the water pump, which is fixed in the chemical pump inlet and middle section, respectively, for the consumables, and replaces the spare parts ailable after wear.
The centrifugal pump balance ring is made of cast iron and is fixed to the water out section, which together with the balance plate to form a balancing device.
The balance plate is made of wear-resistant cast iron and is mounted on an axis, located between the water drain and the tail cover, balancing the axial force.
The chemical pump bushised is made of cast iron and is located in two filling chambers, where the centrifugal pump is used to secure the impeller and protect the pump shaft.For consumables, spare parts can be replaced after wear.
Bearings are single-line heartball bearings, lubricated with calcium-based butter.
填料起密封作用,防止空气和大量漏出。
填料密封由进水段和尾盖上的填料室,填料压盖,填料环及填料等组成,少量高压水流入填料室中起水封作用。填料的松紧程度必须适当,不可压的太紧,也不可太松,以能一滴一滴地渗出为准。如果填料太紧,轴套容易同时耗费功率。填料太松,由于流失要水泵效率。
GC型锅炉给X泵产品用途:
GC型锅炉给X泵特别适用于小型锅炉给水,也可广泛应用于压力容器供水、热水循环、高层建筑给水、农田灌溉、消防增压、水力冲洗、食品、酿造、、化工、水产养殖、保护、化工工艺流程及机床配套等各行业,作为给水排水的动力设备。
锅炉给水泵A大丰锅炉给水泵A锅炉给水泵启动与停车
锅炉给水泵A大丰锅炉给水泵A锅炉给水泵启动与停车
过热器锅炉给水泵本体过热的常见原因是轴承损坏引起的,或者是的油质差、油质差。因此,在泵体过热后,X先要检查是否缺油或油含有杂质,然后检查轴承是否损坏。对于过热的泵体,应检查轴承或支架盖是否过小。
供应的价的价格。客户的X是对我公司支撑。本公司供应X的双语效力,让顾客对产品有更深化的了解。我公司以用户效力为宗旨,以商场要求为方针,创,树承诺的原则,诚挚欢迎各地新老用户选购会泉水泵,公司宽广员工以X质的效力等候各地的新老用户莅临!河北会泉泵业有限公司是我国通用机械泵作业协会成员。是原机电部、江苏省出产中小型混流泵、轴流泵的X厂家,曾参加混流泵标准的起草拟定和中小型混流泵、轴流泵的部X省X共同定型联合规划,其技才干量和工艺制造水平在业界享有较高的X度。公司现称号为原盐城市水泵厂二次改制后称现在我公司X要产品有:HW(HBC)、HL系列混流泵;ZL、ZLB(ZLDB)系列轴流泵;