东莞市樟木头国嘉源塑胶原料经营部
五金通金牌会员 第13年
已通过企业工商认证
公司服务热线
13712108229
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | ||
| 物理性能 | 收缩率 | 平行流动方向 | ASTM D955 | 0.016 | cm/cm | |
| 收缩率 | 垂直流动方向 | ASTM D955 | 0.016 | cm/cm | ||
| 机械性能 | 弯曲模量 | 90 °C, 0.00 mm, Injection Molded, Procedure A, Method I (3 point load), 0.00 mm, Type I, Secant | ASTM D790 | 331 | Mpa | |
| 弯曲模量 | （-40 °C, 0.00 mm, Injection Molded, Procedure A, Method I (3 point load), 0.00 mm, Type I, Secant | ASTM D790 | 3000 | Mpa | ||
| 弯曲模量 | 23 °C, 0.00 mm, Injection Molded, Procedure A, Method I (3 point load), 0.00 mm, Type I, Secant | ASTM D790 | 2410 | Mpa | ||
| 弯曲模量 | 149 °C, 0.00 mm, Injection Molded, Procedure A, Method I (3 point load), 0.00 mm, Type I, Secant | ASTM D790 | 234 | Mpa | ||
| 弯曲强度 | 90 °C, 0.00 mm, Injection Molded, Method I (3 point load), Procedure A, 0.00 mm, Type I | ASTM D790 | 13 | Mpa | ||
| 弯曲强度 | （-40 °C, 0.00 mm, Injection Molded, Method I (3 point load), Procedure A, 0.00 mm, Type I | ASTM D790 | 120 | Mpa | ||
| 弯曲强度 | 23 °C, 0.00 mm, Injection Molded, Method I (3 point load), Procedure A, 0.00 mm, Type I | ASTM D790 | 80 | Mpa | ||
| 弯曲强度 | 149 °C, 0.00 mm, Injection Molded, Method I (3 point load), Procedure A, 0.00 mm, Type I | ASTM D790 | 8 | Mpa | ||
| 断裂点伸长率 | - | 90 °C, 0.00 mm, Comdivssion Molded, Type I | ASTM D638 | 300 | % | |
| - | -40 °C, 0.00 mm, Comdivssion Molded, Type I | ASTM D638 | 11 | % | ||
| - | 23 °C, 0.00 mm, Comdivssion Molded, Type I | ASTM D638 | 300 | % | ||
| - | 150 °C, 0.00 mm, Comdivssion Molded, Type I | ASTM D638 | 300 | % | ||
| 非缺口冲击强度 | - | -40 °C, 0.00 mm | ASTM D256 | No Break | J/m | |
| - | 23 °C, 0.00 mm | ASTM D256 | No Break | J/m | ||
| 热性能 | 熔点 | DSC | 225 | ℃ | ||
| 阻燃性 | - | 3.00 mm | UL94 | HB | ||
| - | 1.5mm | UL94 | HB | |||
| - | 0.81mm | UL94 | HB | |||
| 其它性能 | 极限氧指数 | 3.20 mm | ASTM D2863 | 22 | % | |
