卧式车床 CW6163/CW6180/CW61100重型国标车床卧式车床系列主要适用于车削内外圆柱面、圆锥面、及其它旋转零件,可加工各种公制、英制、模数和径节螺纹,并能拉削油沟和键槽。本系列车床主要有以下特点:
1.床身侧壁采用双筋板,内筋形状采用箱型组合结构,机床高于一般车床,精度稳定,能进行强力切削。
2.溜板设有快移结构,用单手柄形象化操纵。
3.床鞍导轨采用贴结“TSF”软带耐磨材料。
项目 | 单位 | CW6163B CW6263B | CW6180B CW6280B | CW6194B CW6294B | |
床身上X大回转直径 | mm | 630 | 800 | 940 | |
架上X大回转直径 | mm | 750/1000/1500/2000/3000 /4000/5000/6000/7000/ 8000/9000/10000 | 750/1000/1500/2000/3000 /4000/5000/6000/7000/ 8000/9000/10000 | 750/1000/1500/2000/3000 /4000/5000/6000/7000/ 8000/9000/10000 | |
X大工件长度 | mm | 600/850/1350/1850/2850/ 3850/4850/5850/6850/ 7885/8850/9850 | 600/850/1350/1850/2850/ 3850/4850/5850/6850/ 7885/8850/9850 | 600/850/1350/1850/2850 /3850/4850/5850/6850/ 7885/8850/9850 | |
马鞍处X大回转直径 | mm | 830 | 1000 | 1140 | |
马鞍X宽度 | mm | 300 | 300 | 300 | |
床身导轨宽度 | mm | 550550 | 550 | 550 | |
主轴端部代号 | mm | C11 | C11 | C11 | |
主轴通孔直径 | mm | 100 | 100 | 100 | |
主轴前端锥孔 | mm | 1:20/120 | 1:20/120 | 1:20/120 | |
主轴转速范围 | mm | 7.5-1000 | 6-800 | 6-800 | |
主轴转速X数 | mm | 18 | 18 | 18 | |
纵横向进给量种数范 | mm | 64;0.1-24.32 | 64;0.1-24.32 | 64;0.1-24.32 | |
横纵向进给量比 | mm | 1.0/2.0 | 1.0/2.0 | 1.0/2.0 | |
丝杠螺距 | mm | 12 | 12 | 12 | |
公制螺纹种数范围 | mm | 50;1-240 | 50;1-240 | 50;1-240 | |
英制螺纹种数范围 | mm | 26;14-1(牙/寸) | 26;14-1(牙/寸) | 26;14-1(牙/寸) | |
模数螺纹种数范围 | mm | 53;0.5-120 | 53;0.5-120 | 53;0.5-120 | |
径节螺纹种数范围 | mm | 24;28-1(牙/寸) | 24;28-1(牙/寸) | 24;28-1(牙/寸) | |
溜板快移速度 | mm | 4000 | 4000 | 4000 | |
下架X大横向行程 | mm | 440 | 440 | 440 | |
上架X大行程 | mm | 200(架自动走刀130) | 200 | 200 | |
杆截面 | mm | □32 | □32 | □32 | |
尾座套筒直径 | mm | 100 | 100 | 100 | |
尾座套筒行程 | mm | 250 | 250 | 250 | |
尾座套筒锥孔 | mm | Morse 5 | Morse 5 | Morse 5 | |
主电机功率 | mm | 11 | 11 | 11 | |
机床质量 | mm | 3200/3400/3700/4200/4 700/58006800/7800/88 00/9800/10800/11800 | 3200/3400/3700/4200/4 700/58006800/7800/88 00/9800/10800/11800 | 3200/3400/3700/4200/4 700/58006800/7800/88 00/9800/10800/11800 | |
机床长度 | mm | 2958/3275/3725/4225 /5225/6275/7355/8355 /9275/11275/12275 | 2958/3275/3725/4225 /5225/6275/7355/8355 /9275/11275/12275 | 2958/3275/3725/4225 /5225/6275/7355/8355 /9275/11275/12275 | |
机床宽度 | mm | 1393 | 1473 | 1430 | |
机床宽度 | mm | 1537 | 1622 | 1690 |
Model | CA6140 cA6140B(大孔径) | |||||||
床身上X大工件直径 Max. Swing over bed | 400mm | |||||||
架上X大工件直径 Max. Swing over carriage | 210mm | |||||||
X大工件长度 Max. Length of workpiece | 750mm or 1000mm or 1500mm or 2000mm or 3000mm | |||||||
床身宽度 Width of bed | 400mm | |||||||
主轴 Spindle | 主轴转速范围 Spindle speeds | 11—1600 r/min (24 steps) | ||||||
主轴内孔 Hole though spindle | 52mm(80mm) | |||||||
主轴孔锥度 Spindle taper | Morse No.6 (莫氏6号) | |||||||
进给 Feed | 进给数量 No. of feeds | 64种(kinds)(for each) | ||||||
公制螺纹Range of metric threads (kinds) | (1-192mm)44种(44kinds) | |||||||
英制螺纹 Range of inch threads(kinds) | (1-24tpi)21种(21kinds) | |||||||
模数螺纹 Rage of module threads(kinds) | 0.25-48(模数39种)(Module 39 kinds) | |||||||
径节螺纹 Rage of Diametral pitc threads (kinds) | 1-96DP(37种)(37 kinds) | |||||||
床尾 Tailstock | 床尾主轴X大行程 Max tailstock spindle travel | 150mm | ||||||
床尾主轴直径 Tailstock spindle diameter | 75mm | |||||||
床尾主轴孔锥度 | Morse No.5 (莫氏5号) | |||||||
主电机 Main motor | 7.5KW(10HP) | |||||||
包装外形尺寸 Picking dimensions (L×M×H mm) | Overall dimensions for 750 | 2440X1150X1170 | ||||||
Overall dimensions for 1000 | 2650X1150X1700 | |||||||
Overall dimensions for 1500 | 3150X1150X1700 | |||||||
Overall dimensions for 2000 | 3610X1150X1700 | |||||||
Overall dimensions for 3000 | 4610X1150X1700 | |||||||
重量 Weight (Kg) | Length | 毛重 G.W. 净重 N.W. | ||||||
Overall dimensions for 750 | 2700 2000 | |||||||
Overall dimensions for 1000 | 2800 2100 | |||||||
Overall dimensions for 1500 | 3050 2250 | |||||||
Overall dimensions for 2000 | 3300 2600 | |||||||
Overall dimensions for 3000 | 4000 3450 |